Installing EZY HEX for Shed Bases: A Quick Weekend Project
Why building a stable shed base shouldn’t require concrete or costly tradies.
If you’re planning to install a garden shed, tool shed, or even a small workshop, you already know the importance of a stable foundation. But the idea of pouring concrete, hiring tradies, or hauling timber might have you putting it off — again.
That’s where EZY HEX comes in.
Our DIY shed base grid system is designed for Aussie backyards, especially in places like Queensland where shifting soil, heavy rain, and sun exposure can turn a basic slab into a long-term headache.
In this guide, we’ll show you how to install your shed base in a single weekend using EZY HEX: complete with step-by-step instructions, tools needed, and expert tips to make it simple.
Why Shed Bases Matter (And Why Most People Get It Wrong)
Your shed is only as strong as what’s underneath it. A solid, level, and well-drained base:
- Prevents sagging or movement
- Stops water pooling underfoot
- Deters pests and weeds
- Increases the life of your shed
Common pitfalls? Many DIYers skip the base prep or opt for a timber frame that rots over time, or a concrete slab that’s expensive, permanent, and often overkill for smaller sheds.
“Concrete slabs are expensive, permanent, and can sometimes be unnecessary—especially for smaller garden sheds or when the site has good drainage.” ~Backyardbases
Shed Foundation Alternatives in Australia:
| Base Type | Pros | Cons |
| Concrete Slab | Very Stable | Costly, not DIY friendly, needs curing |
| Timber base | Accessible | Can rot, pest-prone, needs replacement |
| EZY HEX | Fast, affordable, durable | Needs level base prep |
Introducing EZY HEX: Built for DIY Shed Foundations
EZY HEX is a durable, recyclable geo grid made from UV-resistant polypropylene. Built for harsh Aussie conditions, it’s ideal for weekend warriors and seasoned tradies alike.
Why people love it:
- Load-bearing strength for sheds from 2x2m to 6x3m
- Built-in drainage – perfect for Queensland’s wet summers
- No concrete, curing, or tradies needed
- Quick to install and built to last
- Reusable and erosion-resistant
Whether it’s a small garden shed in Toowoomba or a workshop base on the Sunshine Coast, EZY HEX works where you do.
Is This Right for Your Shed Project?
EZY HEX is ideal for:
- Garden sheds, tool sheds, and small workshops
- Shed footprints from 2x2m up to 6x3m
- Soil, gravel, or compacted road base surfaces
Things to consider:
Always check with your local council for shed installation guidelines or approval requirements in your region. EZY HEX can be an NDIS-friendly solution for accessible backyard sheds due to its non-slip surface and drainage.
What You’ll Need: Tools & Materials Checklist
Here’s what you’ll need for a successful install:
- EZY HEX panels – Calculate how many you’ll need
- Weed matting or geofabric
- Road base or crusher dust
- Rubber mallet
- Pegs or stakes (for slopes)
- Spirit level or string line
- Rake and shovel
Tip: Buy direct and save. We offer local pickup in Cornubia, QLD and ship Australia-wide.
Step-by-Step EZY HEX Installation Guide
Step 1: Mark Out Your Shed Area
Measure your shed footprint and mark the corners with string lines or pegs.
Step 2: Prep the Surface
Remove grass, rocks or debris. Level the area using a rake and shovel.
Step 3: Lay Your Weed Matting
This helps with drainage and suppresses weeds over time.
Step 4: Add and Compact Base Material
Spread road base or crusher dust. Compact it firmly using a plate compactor or hand tamper.
Step 5: Lay the EZY HEX Panels
Connect panels using built-in clips. Start at one corner and work across.
Step 6: Secure with Pegs (If Needed)
On slopes or high-traffic areas, secure panels with stakes at the edges.
Step 7: Optional Infill
Top with fine gravel or sand to lock panels in. Not essential, but adds a finished look.
Step 8: Position Your Shed
Once your base is solid, place your shed directly on top. No curing time needed.
Before & After: Real Projects from Queensland
“We had a shed sinking into the ground every wet season. Switched to EZY HEX and installed the new base ourselves in one afternoon. Zero movement this year.” – Mick, Ipswich
“Saved $1,200 compared to a concrete base quote. My 4x3m shed’s rock solid and drains perfectly.” – Toni, Bundaberg
Care & Maintenance Tips
- Give the perimeter a quick rake each season to keep gravel topped up
- Watch for drainage around edges in heavy rain
- Weed matting does the heavy lifting – replace every few years if needed
- No need for ongoing treatments or resealing
Frequently Asked Questions
Can I build this solo?
Yes, one person can complete most installs, but a helper makes it easier.
What weight does it support?
EZY HEX supports heavy sheds, tools and equipment – no issue.
Does it work on slopes?
Absolutely. Use pegs to anchor it securely.
Is it bushfire safe?
Yes, the polypropylene is stable and won’t combust like timber.
Where can I buy in QLD?
Shop direct from us! Pickup in Cornubia or we’ll find the cheapest shipping option for your postcode.
Why DIYers and Tradies are Switching to EZY HEX
- Save time – install in a single weekend
- Save money – no concrete, no curing, no tradies
- Eco-friendly – 100% recyclable, with zero runoff
- Reusable for future projects
- Trusted by DIYers and professionals across QLD
Ask us about bulk packs or trade pricing if you’re planning a few projects.
Ready to Get Started This Weekend?
Build your shed base the smart way with EZY HEX. No mess, no stress – just stable, durable ground that lasts.
- Shop EZY HEX Shed Base Kits
- Download the step-by-step PDF install guide
- Got questions? Contact the EZY HEX team – we’re here to help.